UAD Ampex ATR-102

Ampex ATR-102 Open

The Joys of Analog Tape

Calibrate it every day. Keep the tapes in a controlled environment. Push the signal so you get less noise, but not so hard that it distorts. Clean the heads and capstan. Be careful you don’t stretch the tape rewinding. Keep a log of how many punch-ins and re-records you have done. Test the motor and transports.

When someone starts going into the whole “tape was so great” rant, is when I know they have never used it. You can find these people all over the audio boards. They hang out with the “you can never emulate the sound of tape” people. You know who they are. They are right, plugins don’t sound the same. In fact, you can ask the two or three dozen people in the entire world who can actually tell the difference.

Emulation takes the “good” parts of tape and lets you adjust the things that made it a pain in the butt. You can have wow and flutter, but now you can control it. You can get some “saturation”*, but again you can dial in how much. Want crosstalk? Go ahead. Don’t want any? Turn it off. Head bump? OK, or not. Soften the highs, sure — and you can even do it by pretending to use different tape speeds or formulas.

Plugins are great. I have no nostalgic desire to go back. We can have the best from decades of audio engineering and classic hardware, and also discover brand new ways of producing music. There, now I have had my own rant. And now back to my post…

Back to the UAD Ampex ATR-102

All of that “scribble” in the tests is from the wow and flutter, and noise. I have never been that much of a fan. Listen to old solo piano recordings, you will be able to hear what it did to the sound pretty clearly. Also notice the spikes in the frequency response, those are constantly moving up and down. (It’s that famous thing called head bump!)

What I like about tape (emulation) is that the harmonics and phase are constantly moving and shifting a bit. (At least, the well-programmed plugins.) This gives so much life, however you want to interpret that word.

Scroll down to compare the default setting to my ATR-102 preset.

UAD Ampex ATR-102-LUAD Ampex ATR-102-H

__

My Penny_BUSS preset. The wow and flutter are reduced and the frequency response is as flat as I can get it. (But you still have a nice little head bump.) The noise floor, and wow and flutter, are taken down as well. The good parts of tape without the bad! You can click here to go to my presets!

UAD Ampex ATR-102-L-PCUAD Ampex ATR-102-H-PC

*Saturation – sounds just like distortion, because it IS distortion.

What do you think?

Register for Free Samples and Loops at Loopmasters.com
Scroll to top